DISPENSER AND ADMISSION SYSTEMS
PP 200/300

HIGH PERFORMANCE PICK AND PLACE FEEDER

NON-STOP FEEDER SYSTEM FOR UP TO 18,000 PRODUCTS PER HOUR - ABSOLUTE SYNCHRONOUS AND PRECISE

With the PP 200 Pick & Place system, you can quickly and easily place cards, bags, samples, credit cards, CDs, coins and three-dimensional products on a major product, e.g. on a magazine.

Pick & Place, has an independent drive and can be installed anywhere above a conveyor belt. If required, it can be integrated into the control system of the main machine. The maximum lay-up speed is 18,000 products per hour.

Thanks to its modular function, you have the possibility to combine it via transport belts to glueing machines, folding- and packaging machines as well as with other attaching devices. Easy to attach to a transport section through mobile substructure. The height-adjustable dispensing head can be completely moved out of the working area by simple manipulation.

 

TECHNOLOGY

The servo motor of the Pick & Place drives a rotor with suction cups. A suction cup picks up a product from the magazine in the stationary position, which is then deposited in a rotating movement over the main product. The PP 200 and the production machine always run completely synchronously. The conveyor belt with the main products does not have to be stopped to the product tray. A rotary encoder on the main track determines the speed at which the pick & place rotor rotates. Based on the data of a photo cell and the speed determined by the rotary encoder, the software determines where and when the product has to be stored. The PP200 stands for an extremely exact placement, in the case of deviations in the distance can be compensated.

Bild

Characteristics

  • Empty-stack monitoring (opt.)
  • Streamfeeder (opt.)
  • Tray for oblique dispensing (opt.)
  • Vacuum buttons for coins & different products (opt.)
  • Dispenser head with gripper-suction function (opt.)
  • Cam disc and magazine for CDs (opt.)
  • Rotary encoder synchronization
  • Height adjustable with spindle (opt.)
  • Dispensing head easy to move

Technical Data

Output max. 18.000 products/h

Formats

Dispensing product min. 50x50mm
max. 200x150mm (20-Head)
Thickness: 0.1 - 6 mm
Carrier product Distance: 508 mm (400-600 mm) - 20-Head
Distance: 386 mm (300-450 mm) - 15-Head
Dispensing height 600 - 1000 mm
Drive Servomotor/ 400V, 40Hz, 16A, 1kW
Models PP 200 Feeder with precision Servo with up to 200 cycles/min.
PP 300 Feeder with high-performance Servo for output up to 300 parts/min.